A brief ray of sunshine

It's my day off.  And it was tolerable weather.  Sound unlikely for me......yeah.  OK although the afore mentioned statements are true, it wasn't exactly perfect.  Despite being my day off I had to go in to work (twice) in order to keep appointments with clients.  (If in the future after I am an amazingly successful cruising sailor and I have to get a job on land I hope that they will read this and see my awesome work ethic).  I only stayed at work a total of 3 1/2 hours, but I sold 2 cars, so it's ok.  As for the weather, it's been kinda depressing.  A couple Sundays ago it was up in the 70's, and then this last weekend we got 3 inches of snow!  It just came out of nowhere, and covered everything in slush.  I had hoped that I would be able to start varnishing, but with all the changing weather and moisture in the air I've decided to hold off for a bit.

I completed a few tasks on the boat though.  I taped off and repainted the waterline, I put on the boat registration stickers, and finished sanding the woodwork. I took pictures of all this today, but forgot to bring it over here so I could upload them.  I'll do that tomorrow.

I checked out the slot that had been cut to drain any excess water in the keel, it was pretty much dry.  I decided it'd be a good idea to make sure there was no water next to the ballast on the other side of the keel. So although when you think of boat maintenance you usually think of patching holes, not drilling new ones, that's exactly what I had to do.
I drilled into the side of the keel and a bit of gritty black goop came out followed by some water.  I drilled 8 other holes along the keel to drain any moisture I could.  I'm still a bit worried about all this water that has been in there for who knows how long, but I'm pretty confident in the structural integrity of the Bristol.

I found out that the rig I have (from a Columbia 26) has a roller reefing boom, so I don't need to add reefing point to the sail if I need to make the sail smaller in a storm.  It's gonna be nice to just wrap it around the boom and not have to worry about folding it.  I've heard that the roller reefing systems weren't that good, and that's why no one does it anymore.....I guess we'll see.

After sunset I went to Home Depot to get some Frog Tape (way better than the blue painter's tape most people get), some more sanding blocks, some gloves so I don't ruin my skin with the anti-fouling paint, and some tack cloth so I can varnish properly.  Then I bought some rubbing compound and wax to make the boat's hull all slippery and shiny.

It's gratifying to see things coming together over the last couple of weeks.  I've had a list of things to buy, and things to do which wasn't changing at all over the winter months.  I had to get insurance, pay for the slip, get anti-fouling paint ($126/gallon).  Now all I have to do is buy some sails.

An old guy came up to me today and told me about some sailing stuff he was selling.  He had a new sail that didn't fit his boat he was gonna sell for $400, and a roller furling unit for the Jib.  It might not fit, but I'll see how cheap I can buy it off him.

I've recently joined a www.cruisersforum.com which has been great!  The combined knowledge of hundreds of sailors from all over the world helping me trouble shoot my way has been invaluable.  It's also nice to see that I'm not the only one who's starting small and trying to make due with as little as possible.  I know I seem naive to many, but I feel like I could get to Europe just on will power at this point.

Sanding away....

We had gorgeous weather on Sunday, so my family and I went for a nice hike up in the woods.  By Thursday the weather had dropped from 71 degrees to 35!  Of course my day off would fall on a Thursday.  Anyway I went down to the boat to sand down the woodwork so that soon I can start varnishing it.  It was a tough job and I'm still not quite done, but she is looking a lot nicer now.  I have to sand off all the sun bleached gray of about 5 years of neglect.  I've gotten a lot of it back down to the bare wood, but I'm not sure if I'll be able to get everything perfectly even.  Maybe it'll give it a nice weathered look.  We'll see.

You can see the wood on the starboard side is a fair bit lighter than that on the port side. I still need to put down a coat or two of paint in the bottom of the cockpit, but she's looking a lot better than when I bought her.
I clambered back into the engine compartment (which was little cramped by the way) so I could remove the muffler and see about sealing the propeller shaft so it won't fill up with water and sink as soon as I put her in the water.  There were a few wasp nests that I had to clear out.  I got startled and hit my head when my phone decided to vibrate as soon as I touched one of the hives.  Stupid text messages.

Yes, I crammed myself under those stairs. 
After a few hours of sanding I was getting legitimately tired and so I curled up on the starboard aft quarter birth for a nap.  I almost drifted off when I got another phone call.  No rest for me I guess.
I found a small section of deck that's leaking; I always knew it was, but now I know where it is, so that's good.  And for being a 40 year-old boat, I'd say she's holding up very well.
I still need to measure the rig and see for certain what kind of sails I should buy, and how I'm going to match the mast and boom to this boat.

Almost sanded.
Also, today marks the official first day of the sailing season here in Sheboygan.  As soon as I get my paycheck today I'm going to go down to the harbor and pay off the rest of my slip for the summer.

Springtime at last

My day off at work was switched from Thursday to Friday to coincide with the last day of the month.  It was busy at work, but as the weather gets progressively warmer my thoughts turn more and more to sailing.  The forecast called for a snowy rainy mix which luckily didn't come.  I was able to spend most of the day working on my boat getting her ready for her first season of sailing in a long time.  There was a small amount of water that had trickled down into the bilge (the lowest part of the boat) and had frozen over winter.  I had thought that after the 40+ degree weather that it would all melt and I'd be able to scoop it out.  It took days before I could break up the chunks of ice and throw them overboard since the 3,000 pound solid lead ballast in the keel didn't want to warm up as fast as the rest of the boat.
Rather than worrying about buying or renting a generator I decided to just get some useful cordless tools.  I bought a drill and a circular saw.  I used the saw to cut a few boards up for a makeshift floor, and used the drill in conjunction with a wire paint stripper to do most of the other work.  It was amazing how quickly and easily I was able to get the random spills from the previous owner cleaned up when I had electricity on my side.  I had been trying to scrape this stuff out of the cockpit by hand, but it would have taken days; I accomplished the same task in about an hour.  It's so gratifying to see things start to come together.  After a long cold winter of worrying if she'll be ready in time, of being restless, of magnifying problems in my mind, I was finally getting stuff done.  I scrubbed and taped and began to paint.  I organized and analyzed. Now I know the ins and outs of the boat just a little bit better.  The part that I thought had been leaking I sealed up so that no moisture could make it through.  On Sunday when I swung by to check it out in the rain I found out what the real problem had been all along.  The cockpit is like a big bath tub with two drains close to the forward edge.  These drains go through two hoses and out the bottom of the boat.  One of these hoses was not only clogged at them bottom, but it wasn't properly aligned where the drain meets the hose, so any rain water was just filling up inside the hose and draining out inside the boat.  I tightened down the hose clamps inside the boat, and then went to see about clearing the clog out.  It was pretty easy actually; I found a long bolt, and poked it up in the drain once and a hole bunch of water splashed out on my arm.  Now when it stops raining I can go back and paint the engine bay, finish painting the cockpit, and begin varnishing the woodwork.  Varnishing will probably take a long time, but I'm hopeful that it'll look all pretty when I'm done.
The official sailing season starts here on the 15th of April.  My goal is to have her in the water by my birthday on the 24th of May.  These dates are getting closer and closer.  I do feel confident that I'll have everything done on schedule, and then I can move in and enjoy the summer aboard.  She may not be the newest, prettiest, or most high-tech boat out there, but at least I will have the satisfaction of knowing that I brought her back to life and helped her be out where she belongs: on the water.
     -I'll put pictures up next time-   Feel free to leave comments or ask questions.  Otherwise you can find me on Facebook.

Chores yet to do.

I was able to get over to the boat before all the dew had been dried up by the sun.  I used an old towel to wipe the moisture away so I could begin work.  A little bit more sanding, and another two coats of paint finished off the transom.  It is now gleaming in "china white", and ready to have a name painted on it.  I have decided on the name, but I'll explain that later.
I still need power tools to get the rest of the flooring up in the cabin.  I can't wait to get down there and level it all out so I can rebuild the floor.  I am looking forward to having another 2" of headroom, and a solid surface to walk on.  I am also hoping that the musty smell will go away after I get everything vacuumed up and repainted in the engine compartment.  While I was waiting for coats of paint to dry I curled up in the foreward berth for a few minutes.  It was surprisingly comfortable.  I let my mind wander a bit; I love thinking of when she'll actually be in the water heading off to distant horizons.  I can just imagine diving off of the bow pulpit to help set a heavy anchor in the sand near a tropical reef.  I'd love to bring a surfboard along wherever I go because you never know when you'll find that perfect wave. 
The Sheboygan Sea Scout skipper, Tom, just happened to be driving by.  I showed him my new boat for the first time.  He was kind enough to give me a few names of people who might be able to help me inspect the diesel engine and make sure it's ready to go.  I've always wanted to have an inboard so I can charge up my batteries with the alternator, and so I don't have to strap an ugly outboard onto my freshly painted transom.  There are pros and cons of every set up on a boat, but I think I've found the perfect compromise with everything my boat has. 
I'm hoping to be able to borrow some tools from my grandma (cause we all know she's never gonna use a circular saw) to speed up the work.  The chores I have yet to do are as follows (in no particular order):  install dorade vents, buff out the plexiglass windows so their transparent again, oil all the woodwork and rub rails, remove the rest of the cabin sole, drain and dry the foam insulation, level the cabin floor support, rebuild the cabin sole, re-seat all the stanchions, repair and re-seat the veneer on my deck hatch box, caulk seams on some of the woodwork, clean and paint the engine compartment, repack the rudder bearings, inspect and install the engine (and all parts), clean the head [toilet], inspect the septic tank, mount bow stanchions and hand rail, mount the mast step, paint the bottom with anti-fouling paint, and then buff and wax the whole hull.  It should be fun.  I really am looking forward to it.  A lot of it is just cosmetic, some of it is just preventative maintenance, and some (like the cabin sole) needs to be done. 
Of course I also have to paint the name on her transom. I'll let y'all know my decision in a later post.  I hope to get some before and after pictures up pretty soon as well.  Thanks for reading!

A good day's work.

Today was my day off of work at the dealership, so I slept in a little bit.  I had a few delays in the morning (being called in to sell a car when they didn't end up buying it, voting, eating etc.)   After I was finally all squared away and ready to work I stopped by Home Depot to see what kind of painting supplies they had. I could see all sorts of tools I'd like to have, and that I would put to good use but I had to limit the amount of money I spent today.  They didn't have the right kind of paint, so I went to a local boat repair shop to get  some.  The stuff I was looking for was $41.00 per quart!  I can't wait till I have to buy the anti-fouling paint for the hull.  I was able to find some green paint that I thought would match the hull pretty well for $31.00/quart.  I bought that and headed over to the boat.  After a quick sample on the transom I decided that it didn't match properly, and that I wanted to have a white transom after all to contrast the dark green hull.  After returning the paint to the marine shop I headed to the north side of town to Menards to see what they had there.  I found the people in the paint department very helpful.  Obviously they didn't carry marine grade stuff either, but I was able to find a hardcore primer that bonds well to fiberglass, and some hard wearing paint to put over that.  I know it might now be the kosher way to do it, but for right now I just want to get the old patched up stern looking good again.
A quick pit stop at Subway, and a few minutes later and i was back on my boat.  I sanded, taped, primed, waited, sanded, primed, waited some more, and then got one coat of paint on the transom today.  Tomorrow morning I want to go clean up the lines a bit, and put on two more coats of paint.  Instead of being bored sitting around I decided to go to work ripping out the cabin sole.  I did as much as I could with the hand saw that I bought, and a piece of bar stock steel as a makeshift crow-bar.  Now the starboard half of the floor in the cabin is out; which is good cause it was squishy plywood not strong enough to support me.  The fiberglass underneath is solid.  I need a circular saw to get the port side floor out so I can level the fiberglass, and build a new sole.  One nice thing about this project is that I can make the floor a couple of inches lower so I have better headroom inside.
On board someone had left some WestMarine Teak Oil.  I went to work oiling up some of the woodwork.  I was planning on varnishing all the wood, but in Blue Water the author says he oiled all of his wood cause it's less maintenance, and repels water just as good.  The pieces I did are a bit darker than I would like, but it's ways easier to just dump some oil on wood and wait for it to soak in, than it is to varnish, sand, varnish, sand, varnish, and then know that I'll have to do it all again next season.
All in all I'd say it was a pretty good day.  Things are coming together on the restoration part of the boat, soon it will be the outfitting of it all.
Thanks for reading, feel free to explore the rest of my blog, and leave comments.